- Heat Exchanger[2]
- Refrigeration & Heat Exchange Parts[6]
- HVAC Systems & Parts[6]
- Industrial Chiller[6]
- Industrial Air Conditioners[6]
- Energy Saving Equipment[1]
- Air Conditioner Parts[1]
- Other Refrigeration & Heat Exchange Equipment[3]
- Cooling Tower[2]
- Industrial Heater[6]
- Heat Pump Water Heaters[6]
- Other Electrical Equipment[6]
- Other Home Appliance Parts[1]
- Contact Person : Mr. Huang Billy
- Company Name : Bright Air Conditioning Co., Ltd.
- Tel : 86-534-2299956
- Fax : 86-534-22999282
- Address : Shandong,Dezhou,No. 3379 jinghua road, dezhou, shandong
- Country/Region : China
- Zip : 253022
Heat Recovery Ventilators
Related Product Searches:Heat Recovery Ventilators,High Quality,heat recovery ventilators, ventilation with heat recovery,XHQ/XHX 200D-7000D
Ceiling mounted type Heat Recovery VentilatorsXHQ/XHX 200D-7000DAir flow: 200-7000 m3/h
The needs to reduce to the minimum the costs of heating and cooling systems with external air is increasing.
The heat recovery ventilator perfectly merges with the needs for comfort and energy-saving.
These units allow to extract certain amount of exhaust air from the room and supply an equivalent quantity of fresh air. A cross flow air to air plate exchanger assures an efficient heat recovery between exhaust and fresh air, therefore the fresh air is pre-heated or pre-cooled according to the seasons in order to recover over more than 50% of the energy that would normally be lost with the exhaust air expulsion.
The supply air is filtered before entering the heat recovery exchanger that is protected with a plate filter also at the exhaust air side.
The heat recovery ventilators can be used to integrate traditional systems made up of fan coils, air conditioning units or radiators. They can operate both in summer and winter.
FEATURES
CASING
Panels and frame are made of galvanized steel, protected with polyester powder painting to ensure total resistance to atmospheric agents. Panel thermal and acoustic insulation by means of polyethylene panels with a thickness of 10 mm.
RECOVERY
High efficiency cross flow air to air paper plate type total heat recuperators or aluminum plate type sensible heat recuperators.
FILTER
G3 efficiency air filters, which may be easily removed from the sides for periodic cleaning.
FAN DECK
Fan bodies mounted on rubber anti-vibrators.
External rotor type double suction centrifugal fans which may be removed from the sides for periodic maintenance.
Three speed fans for mod. 200D÷1300D.
CONDENSATION DRAIN TRAY
Galvanized steel condensation collection tray, with condensation drainage towards the lower part.
OPTIONAL
CW: Separate module with 4-row water cooling coil.
CPW: Separate module with 4-row water cooling coil and 1-row water post-heating coil.
CPE: Separate module with 4-row water cooling coil and electric post-heating coil.
CL: Connection line for controller in customized length.
Heat Recovery Ventilators
